The 12 port PoE panel is for 10/100M Ethernet. RJ45 sockets on the top named “LAN/Switch/PC” 1/2&3/6 are for data transmitting. The bottom RJ45(power+data) sockets are for data and power: 1/2&3/6 transmitting data, 4/5(+)&7/8(-) for power. Passive POE adapter is equiped with 12 of RJ45 sockets and two 60V DC power jacks. Input power requests 120W or more AC TO DC power converter. The input dc hole diameter is 2.5mm and the other end OD id 5.5mm.
Each socket provides protection against short circuit (current protection 650mA +15% -15%). The total output power must be lower than the MAX input power of AC-DC power converter. If not, it is necessary to consider taking higher AC-DC power converter. The recommended formula for AC-DC power converter is：10W per RJ45 set (1 set = 2 x RJ45sockets). For example, 12 x 10W = 120W for 12 port Passive PoE panel .
The configuration size of panel is：1U (height), 19” (width) and 25mm (thickness)
– USE 10/100M Ethernet
– Flexible power(DC 12V TO 48V)
– Each Port Current Protection (650mA+/-15)
– For 19’’ Rack