The Mimosa N5-45×2 is the industry’s first sector antenna to deliver the best of both worlds – incredible noise rejection and long-distance performance, with wideband 4.9–6.4 GHz operation for fixed wireless broadband. The dual-slant polarization, 45º sector can be used with any third-party 2×2 MIMO radio solution, or two N5-45×2 antennas can be connected to the 4×4 MIMO Mimosa A5c access point, aimed in different directions, for 2x spectrum reuse, superior range and noise rejection at collocation and tower sites.
Reject Noise and Synchronize
Overcoming noise at tower sites is key to scaling capacity. The N5-45×2 delivers industry-leading side lobe rejection and an unprecedented 43 dB front-to-back (FTB) performance — the highest FTB ratio of any sector or horn antenna in the industry. Compatible with any third-party, 2×2 MIMO radio solution, there’s no higher performance antenna in the industry.
Supporting 4.9 GHz public safety applications and multipoint licensed operation up to 6.4 GHz, where regulations allow, the N5-45×2 provides an additional 800 MHz of spectrum beyond the crowded 5.15–5.85 GHz unlicensed channels.
Go the Distance
The Mimosa N5-45×2 offers the best of both worlds – a long distance, high gain sector with the superior noise isolation of a horn. Competitive sectors offer high-gain, but fail to reduce side lobe and front-toback noise. Symmetric horn antennas achieve good noise isolation, but typically offer lower gain and inefficient symmetrical ground coverage patterns.
Compatible with Third-Party Radios
Blending the best of sector antennas with the best features of a horn, the Mimosa N5-45×2 is a great sector antenna choice to use with any 2×2 MIMO radio. Even better, the ultra-wide 9º vertical beamwidth covers substantially more ground than other leading sector antennas.
|Frequency Range||4.9–6.4 GHz|
|Connectors||2 x N female|
|Tested ambient temperature||-40°C to 55°C|
|Antenna beam width||Azimuth(4 dB): 45º
Azimuth (3 dB): 42º
Elevation(3 db): 9º